Basic Info.
Inlet Connection
G5/8"
Outlet Connection
M16X1.5 Right
Transport Package
20PCS Per Carton
Specification
carton size: 52X43X32.5
Trademark
DSW
Origin
China
HS Code
8481804090
Production Capacity
100000PCS Per Month
Product Description
Oxygen Regulator
The flowmeter with humidifier is used in reducing gas pressure and adjusting the gas volume, which rescue patient and treat as oxygen therapy by hospital.Also may make using of other gas reduced pressure and the control flow.
Product main feature:
The product has artistic outlook, and flow control comfortable and stable.
The reductor is adjustable;The structure is unique, and the performance is reliable.
The stainless steel floater and the orange substrate flowmeter have a especially visual effect;
The international standard connect way, is suitable for all kinds of gas bottle installation.
Based at Ningbo,China,Ningbo DSW Industry Co.Ltd As a professional oxygen regulator company has been involved in the industry over thepast 10 years. we have 12000m2 size factory and 80 workers , export to South America, USA, Middle east and Asia countries.
Our major products are Medical Oxygen Regulator with vertical connector, Vertical-connector Oxygen Regulator, Top-thread Hand-style Oxygen Regulator, Medical Oxygen Pressure Regulators, Factory-price Medical Oxygen Regulator for O2 Cylinders, Medical Oxygen Inhalers With Pressure Gaugse Protected, Medical Oxygen Therapy Regulators With Humidifiers for Medical Oxygen Therapy System.
As we started to have well equipped workshop facilities, and go to international welding shows, our quality and up-to-date products
were quickly accepted by customers from foreign countries, therefore the international trading business grew rapidly.
How to use
1.Open the valve of oxygen cylinder after connect the screw nut of air intake closely.
2.Connect the oxygen pipe to the oxygen outlet firmly.
3.Demount the humidifying cup(anti clock wise rotation),put some distilled water in (purified water or plain boiled water can also take place),the water quantity should be between the bottom and top tick mark,then tighten up the bottle cap to the humidifying cup(clockwise rotation).
4.Rotate the flow regulating valve to the rate you need (anti clockwise to up,clockwise to down,till to close),then put it to nose to use.
5.Close the valve of oxygen cylinder firstly while not using,then close the flow regulating valve until the pointer of oxygen manometer return to zero.
Attention
1.Make sure there is no ash on the connector and check the screw thread,then install the inhalator.
2.Make sure the flow meter is vertical to the floor and flow regulating valve is closed,then open the valve of oxygen cylinder slowly,regulate the flow after the high pressure gauge shows the pressure of the oxygen cylinder.
3.No drastic shock,far away with the corrosive substance,and no oil stain.
4.The set screw of the safety valve can't be rotated at random,non-professional people are forbidden to dismount.
Condition for storage
Should be kept in the environment whose humidity is less than 90%,no corrosive gas and drafty.
Quality guarantee period
We will fix or change the oxygen inhalator within a half and a year after the day of living the company when it can't proper functioning,it should be under the condition of obeying the rule of storage and using.
Specification
1.Forbid to use the Buoy Type Oxygen Regulator to take oxygen atomization treatment.
2.Forbid to dismount by yourself.
Q1: If you are factory or trade company?
We are manufacturer with more than 20 years.
Q2: What is your delivery time?
We promise 20-25 days once deposit paid and workshop drawings confirmed.
Q3: What is your payment terms?
We accept TT and L/C at sight.
Q4: What is your packing for all regulators?
We can pack all regulators by pallet , also no pallet is available for different type cylinder.
Q5: Can you provide OEM design?
Yes, we can, we are factory under ourself R&D team, so custom regulator is welcome.
and we can make customerbrand name on regulator shoulder, color, printing, etc...
Q6: What is your MOQ?
Our MOQ is 50 pcs.
Q7: Do you have any protection for the head of the regulator?
Yes, in our factory, each regulator is protected by standard cap which can make sure the safety
of torch during the transportation.
Q8: What is your advantage with other competitors?
We are factory with excellent equipment and high quality control system, and our factory price is more competitive, fast
shipment with high quality, our service is also best with 24 hours on line for fast reply your requestments.
The flowmeter with humidifier is used in reducing gas pressure and adjusting the gas volume, which rescue patient and treat as oxygen therapy by hospital.Also may make using of other gas reduced pressure and the control flow.
Product main feature:
The product has artistic outlook, and flow control comfortable and stable.
The reductor is adjustable;The structure is unique, and the performance is reliable.
The stainless steel floater and the orange substrate flowmeter have a especially visual effect;
The international standard connect way, is suitable for all kinds of gas bottle installation.
| Medium | Inlet Pressure | Outlet pressure | Nomimal Flow Rate | Inlet connection | Outlet connection | |
| O2 | 15Mpa | 0.01-1.25 | 40m3/h | G5/8" | M16x1.5 right | |
| C2H2 | 3Mpa | 0.01-0.15 | 5m3/h | M16x1.5 left |
Based at Ningbo,China,Ningbo DSW Industry Co.Ltd As a professional oxygen regulator company has been involved in the industry over thepast 10 years. we have 12000m2 size factory and 80 workers , export to South America, USA, Middle east and Asia countries. Our major products are Medical Oxygen Regulator with vertical connector, Vertical-connector Oxygen Regulator, Top-thread Hand-style Oxygen Regulator, Medical Oxygen Pressure Regulators, Factory-price Medical Oxygen Regulator for O2 Cylinders, Medical Oxygen Inhalers With Pressure Gaugse Protected, Medical Oxygen Therapy Regulators With Humidifiers for Medical Oxygen Therapy System.
As we started to have well equipped workshop facilities, and go to international welding shows, our quality and up-to-date products
were quickly accepted by customers from foreign countries, therefore the international trading business grew rapidly.
How to use 1.Open the valve of oxygen cylinder after connect the screw nut of air intake closely.
2.Connect the oxygen pipe to the oxygen outlet firmly.
3.Demount the humidifying cup(anti clock wise rotation),put some distilled water in (purified water or plain boiled water can also take place),the water quantity should be between the bottom and top tick mark,then tighten up the bottle cap to the humidifying cup(clockwise rotation).
4.Rotate the flow regulating valve to the rate you need (anti clockwise to up,clockwise to down,till to close),then put it to nose to use.
5.Close the valve of oxygen cylinder firstly while not using,then close the flow regulating valve until the pointer of oxygen manometer return to zero.
Attention
1.Make sure there is no ash on the connector and check the screw thread,then install the inhalator.
2.Make sure the flow meter is vertical to the floor and flow regulating valve is closed,then open the valve of oxygen cylinder slowly,regulate the flow after the high pressure gauge shows the pressure of the oxygen cylinder.
3.No drastic shock,far away with the corrosive substance,and no oil stain.
4.The set screw of the safety valve can't be rotated at random,non-professional people are forbidden to dismount.
Condition for storage
Should be kept in the environment whose humidity is less than 90%,no corrosive gas and drafty.
Quality guarantee period
We will fix or change the oxygen inhalator within a half and a year after the day of living the company when it can't proper functioning,it should be under the condition of obeying the rule of storage and using.
Specification
1.Forbid to use the Buoy Type Oxygen Regulator to take oxygen atomization treatment.
2.Forbid to dismount by yourself.
Q1: If you are factory or trade company?
We are manufacturer with more than 20 years.
Q2: What is your delivery time?
We promise 20-25 days once deposit paid and workshop drawings confirmed.
Q3: What is your payment terms?
We accept TT and L/C at sight.
Q4: What is your packing for all regulators?
We can pack all regulators by pallet , also no pallet is available for different type cylinder.
Q5: Can you provide OEM design?
Yes, we can, we are factory under ourself R&D team, so custom regulator is welcome.
and we can make customerbrand name on regulator shoulder, color, printing, etc...
Q6: What is your MOQ?
Our MOQ is 50 pcs.
Q7: Do you have any protection for the head of the regulator?
Yes, in our factory, each regulator is protected by standard cap which can make sure the safety
of torch during the transportation.
Q8: What is your advantage with other competitors?
We are factory with excellent equipment and high quality control system, and our factory price is more competitive, fast
shipment with high quality, our service is also best with 24 hours on line for fast reply your requestments.